note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: sh0072a doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number / ordering information 1 / ssr04 __ __ __ __ screening 2 / __ = not screened tx = tx level txv = txv level s = s level package s.22 = smd.22 configuration ct = centertap voltage 150 = 150 v 200 = 200 v ssr04150cts.22 thru ssr04200cts.22 4 amp hermetic surface mount centertap schottky rectifier 150 - 200 volts features: ? extremely small footprint ? extremely low forward voltage drop ? low reverse leakage ? hermetically sealed surface mount package ? guard ring for overvoltage protection ? 175oc operating junction temperature ? tx, txv, and s level screening available - consult factory maximum ratings 3 / symbol value units peak repetitive reverse and dc blocking voltage ssr04150ct ssr04200ct v rrm v rwm v r 150 200 volts average rectified forward current (resistive load, 60 hz, sine wave, t a = 25oc, per leg) i o 2 amps peak surge current (8.3 ms pulse, half sine wave superimposed on i o , allow junction to reach equilibrium between pulses, t a = 25oc; per leg) i fsm 20 amps operating & storage temperature t op & t stg -65 to +175 o c maximum thermal resistance (junction to case, per leg) r jc 16 (typ 12) o c/w notes: smd.22 (s.22) 1 / for ordering information, price, and availability - contact factory. 2 / screening based on mil-prf-19500. screening flows available on request. 3 / unless otherwise specified, all el ectrical characteristics @25oc. (dime used for size reference)
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: sh0072a doc electrical characteristics (per leg) 3 / symbol min typ max units instantaneous forward voltage drop (t a =25oc, 300 ? sec pulse) i f = 0.1 a i f = 0.5 a i f = 1 a i f = 1.5 a i f = 2 a v f1 v f2 v f3 v f4 v f5 - 0.65 0.77 0.825 0.865 0.90 - 0.82 0.87 - 0.95 v dc instantaneous forward voltage drop (t a =-55oc, 300 ? sec pulse) i f = 1 a i f = 2 a v f6 v f7 - 1.03 1.34 - - v dc instantaneous forward voltage drop (t a =125oc, 300 ? sec pulse) i f = 0.1 a i f = 0.5 a i f = 1 a i f = 1.5 a i f = 2 a v f11 v f12 v f13 v f14 v f15 - 0.49 0.615 0.685 0.73 0.77 - 0.69 0.76 - 0.85 v dc reverse leakage current (rated v r , t a = 25oc, 300 ? sec pulse minimum) i r1 - 0.075 1 ? a reverse leakage current (rated v r , t a = 100oc, 300 ? sec pulse minimum) i r2 - 12 - ? a reverse leakage current (rated v r , t a = 125oc, 300 ? sec pulse minimum) i r3 - 55 200 ? a reverse leakage current (rated v r , t a = 150oc, 300 ? sec pulse minimum) i r4 - 250 - ? a junction capacitance (f = 1mhz, t a = 25oc) v r = 5v v r = 10v c j - 21 16 - 25 pf package outline: smd.22 (s.22) pin out: pin 1: cathode pin 2: anode 1 pin 3: anode 2 note: for optimal performance, connect anode terminals together. solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com ssr04150cts.22 thru ssr04200cts.22
|